2010-2014 SVT Raptor RPG Boxed Steel Lower Control Arms (Single Shock) RAPA0202

Highlights:

• Strong and durable set of Raptor LCAs
• Boxed steel construction with interior and exterior welds
• Frame mount spherical bearings with uniball knuckle mount
• Accepts factory coilover or aftermarket 3.0 coilover
• Made in the USA
• Backed by a limited lifetime warranty

Extremely Strong LCAs with Heavy-Duty Bearings and Uniball

The stock Lower Control Arms (LCAs) on your 2010-2014 Raptor aren't the weakest things in the world, but it's not impossible to crack their factory strut mount or even snap them at the knuckle if you're out pushing your Raptor to the limit off-road or jumping. RPG's Boxed Steel Lower Control Arms are far stronger than the stock LCAs and are able to take hard hits and heavy landing without ruining your day in a very big way. The RPG LCAs are drop-in replacements for the stock LCAs and feature durable spherical bearings for the frame mounts and a strong uniball joint for the knuckle spindle that won't fail at an inopportune time. RPG's SVT Raptor LCAs also feature a recessed lower strut mount that's far stronger than the raised mount on the factory arms and helps better protect the stock coilover assemblies' bushings and sleeves from debris. These LCAs can accept both the stock 2.5 Fox coilovers as well as just about any aftermarket 3.0 coilover for the 2010-2014 SVT Raptor.

Heavy-Duty Boxed Steel Construction with Both Interior and Exterior Welds

Each RPG Raptor LCA is built tough enough to handle even the most extreme Raptor off-road applications and terrain, while still offering OEM-like fitment and function. The RPG LCAs are built entirely out of thick, boxed steel that's expertly welded together by RPG's technicians on both the outer an interior surfaces to promote maximum durability. The control arms feature1.5" spherical bearings for their frame mounts that can handle far more load than the stock rubber bushings and are fully-enclosed within the welded frame of the arms to ensure excellent levels of strength. The LCAs come with custom-machined center pins for adapting the end ball joint over to a uniball as well as custom misalignment spacers to help with the installation. The RPG LCAs even come with OE-style steering stops that ensure you don't over-extend your Raptor's steering and cause issues down the road. Each set of arms comes standard with a titanium powder coat finish, as well as all the hardware you need for install. The LCAs are made right here in the USA and come backed by a limited lifetime warranty.

Fitment: 2010-2014 SVT Raptor.

Professional Installation Recommended: These LCAs will require some assembly and may need to be lightly modified to work in applications with other aftermarket components.

Single Shock Only: This version of RPG's LCAs is designed only for the stock coilover or an aftermarket replacement and does not have a provision for a dual-shock setup.

Requires Sway Bar Delete: These LCAs do not come with a provision for the stock end links and will require you to delete your Raptor's front sway bar.