2006-2014 F150 Husky Rear Wheel Well Guards (Pair) 79101

06-14 F150 Husky Rear Wheel Well Guards

We price match! Call 623-434-5277!

Part#:

79101

18 Review(s) Write a Review

13 Customer Q&A(s)

$94.65 ~~$139.95~~

Retail Price:$139.95

Your Savings:$45.30(32%)

20 in stock: Ships in 1 Business Day

You will earn

Reward Points with this Purchase.

Product Features
18 Customer Review(s)
13 Q&A(s)

Highlights:

Covers the gaps in your F150's rear wheel wells
Adds a clean look and prevents grime build-up
Pliable, yet strong construction
Easy, drop-in installation
Husky Lifetime Guarantee

Keep Grime and Mud from Collecting in Your Wheel Wells

The rear wheel well of your truck is one of the toughest places on the entire planet to get clean, especially if you're into frequent trips through the mud. While we still don't have any good cleaning tips for all the gunk that gets trapped in there, we do have a way to keep mud, road salt, grime, and gunk from getting up in there in the first place with a little help from our friends over at Husky Liners. This kit from Husky Liners features a pair of rear wheel well liners that help keep all the crud that usually collects up in the well and inner bed completely out of your truck. These Rear Wheel Well Guards feature an OE-style look that almost looks like there's no guard there at all to keep a clean exterior look while keeping out the muck and grime.

High-Strength, Impact-Resistant Plastic Construction

Like all of Husky's other products, these wheel well guards are built extremely tough and for a perfect fit onto your 2006 to 2014 F150. Each liner is made out of a high-quality, high-density polyethylene that's resistant to impacts, road salt, moisture, and any other debris that your wheels kick up. These liners help keep your F150's frame, bed rails, leaf springs, and other suspension components protected from corrosion and contamination to keep your F150 running along at its best. Installation is extremely simple and the guards come backed by a Husky Lifetime Guarantee.

SVT Raptor Fitment: these wheel well guards will not fit 2010 to 2014 SVT Raptors.

Check out our epic installation of Husky's Wheel Well Liners on our 2012 F150 EcoBoost FX4 Project Truck.

Write a Review

2013 FX4

Looks awesome once installed. Massive difference especially next to a truck without them.

Did you find this helpful? 3 of 3 Found Helpful

Reviewed by: (Verified Buyer) David Bledsoe from OK on 6/27/2016

2013 f150 vrewcab 5.0

Look good one i got them installed, they do work with weather tech no-drill mud flaps. My only issue was the passenger side liner where it crowns around the outer fender, there is a kink in it so it hangs down in one spot. Should make them more ridgid.

Did you find this helpful? 3 of 3 Found Helpful

Reviewed by: (Verified Buyer) james enlow from Centralia, wa on 10/4/2016

2014 FORD F-150 CREW

ARRIVED DENTED. PASSENGER SIDE WENT IN WITHOUT MUCH PRYING, HOWEVER THE DRIVER SIDE WAS MUCH MORE DIFFICULT AND REQUIRED MUCH LEVERAGE, PATIENCE, SKILL, AND MUSCLE TO GET A NEAR FIT. NOT A JOB FOR A BEGINNER.

Did you find this helpful? 2 of 4 Found Helpful

Reviewed by: LARRY SHAW from NEWARK, OHIO on 11/29/2015

2012 f150 xlt

Received them extremely quick and exactly what I ordered! Great quality and great service had them for a couple weeks and gone through a couple snows and work awesome! Thanks stage 3!

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Jared from Lincoln, Ne on 1/19/2016

2014 Ford F-150 Lariat

Worked out great. Good fit and ease of installation. I am glad I ordered these.....

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Charles Saucier from Key West, Fl. on 6/11/2015

2013 Ford F150 FX4 Supercab Ecoboost

Much cleaner look, did not like the frame to bed gap, and will provide more protection especially for winter. Took a little persuasion to install, I had to notch the passenger side front a little bit for the fender support rod, but that was manufacturing tolerance on the truck not the liner

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Joe from CT on 11/17/2016

2009 F150

Pretty easy to install. Needed a little bit of trimming to fit on my passenger side but easy fix nothing crazy. This is a must for as cheap as it is and makes the truck look more together!

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Eric from Sanger Tx on 12/22/2016

2016 F-150

Had to cut on the liners a little bit because of the factory fender flares took a little time to figure this out. But love them, also they are made in the USA and they look outstanding in my 2016 F-350 and my wife's F-150 everyone should use these for this price!

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Mike Crase from Franklin Ohio on 3/13/2017

'13 FX4

Pretty easy install. Takes a little shoving to get them in the right position but once they're there, they fit well. Ties everything together nicely. I have taken them through the mud and they make a huge difference.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: R B from AR on 10/20/2017

2013 Ford F-150 Ecoboost

Quick fit and good product

Did you find this helpful? 1 of 2 Found Helpful

Reviewed by: (Verified Buyer) Jason Clark from Pennsylvania on 5/23/2015

2014 S-CREW Eco FX4

These were a bit of a pain to install doing it all by myself. The hard part was getting it back in the space it should be in, and getting the corner screws lined up. I think I ended up drilling my own holes. They look great once installed. I hated seeing the frame/bed gap. Now the fender-well looks clean.

Did you find this helpful? 1 of 3 Found Helpful

Reviewed by: Sam N from Tennessee on 2/15/2016

2010 Ford F-150 XLT 4.6 3 valve

Great product looks super clean only complained they didn't send enough Hardware the clips they shorted me2

Did you find this helpful?

Reviewed by: Richard Dixon from Strasburg on 4/14/2019

2014 F150

Broke a drill bit during install leading to an "extra" hole. But they look great and were easy to install compared to the suspension overhaul I had just done. They look good!

Did you find this helpful?

Reviewed by: Rick G. from Peoria, AZ on 4/17/2019

2006 F150 FX4

Fits great and gives the rear a good clean look.

06-14 F150 Husky Rear Wheel Well Guards Review Image!

Did you find this helpful?

Reviewed by: Jerry Jones from Cantonment on 3/31/2020

2012 F150 XL

JUST PUT THEM ON TODAY WITH A SET OF MUDFLAPS NEED A FEW MORE CLIPS AND I WILL BE DONE THEY LOOK GOOD FIT IS GOOD EASY TO INSTALL I WOULD GIVE THEM A 9 OUT OF 10.

Did you find this helpful?

Reviewed by: CHESTER from RENSSELAER NY on 7/4/2020

2011 f150 ecoboost

looks awesome , makes the truck look finished and more importantly they will keep all the road dirt and salt from splashing up into the trucks frame and wheel wells.....great price and an easy install, took me about 20-30 minutes.

Did you find this helpful?

Reviewed by: marc from North Tonawanda New York on 7/22/2020

2014 f150

fits great

Did you find this helpful?

Reviewed by: Eric A Lupo from Monmouth Junction on 10/31/2020

2013 FX4

Looks great once installed. Not so sure the install was as easy as they say it should be. Had to trim mine due to my Air Ride Suspension I have installed. They hang too low other wise. Trimming was easy enough with a razor knife. Everything else went as stated.

Did you find this helpful?

Reviewed by: (Verified Buyer) Chance from Salt Lake City on 2/4/2021

Would these work on a SVT 2014 Raptor?

Asked by: David - 6/12/2016

They will not. The Raptor uses different bedsides and their wheel wells have different dimensions. Unfortunately, Husky does not offer a set specific to the SVT Raptors at this time.

Was this answer helpful? 3 of 3 Found Helpful.

Answer provided by: [email protected] (6/13/2016)

Submit an answer

Would these Husky Liners work with the Husky Mud Flaps?

Asked by: Ryan - 3/17/2015

I believe they will on the F150s, however, I think you need to install the Mud Guards first before you throw on the liners to save some hassles.

Was this answer helpful? 2 of 2 Found Helpful.

Answer provided by: [email protected] (3/18/2015)

Submit an answer

Would these fit on my 2004 (non-heritage) F150 FX4?

Asked by: steve - 10/9/2014

Unfortunately, these only fit 2006-2014 F150s, according to Husky Liners.

Was this answer helpful? 1 of 1 Found Helpful.

Answer provided by: [email protected] (10/10/2014)

Submit an answer

Does a lift (two inches) create any issues with install or dos the hardware only attach to the bed itself?

Asked by: Cool Hand - 12/17/2014

No issues. The self-tapping screws install into the bed. We currently have these installed on our 2012 F150 EcoBoost Project truck which is at 8" of lift without any problems.

Was this answer helpful? 1 of 1 Found Helpful.

Answer provided by: [email protected] (12/17/2014)

Submit an answer

Will these fit on a 08 ford f150?

Asked by: marc - 8/11/2015

Yep, they will.

Was this answer helpful? 1 of 1 Found Helpful.

Answer provided by: [email protected] (8/13/2015)

Submit an answer

Is there a problem installing these liners on an 2012 F150 that has Bushwacker fender flares?

Asked by: Alvin S. - 2/24/2016

We've had customers do it, though the install wasn't quite as straightforward as popping them in two seconds. I believe you need to remove a couple of the clips holding the flares to the truck, and then tuck the liner in before installing the liners and then reclipping the flares. Regardless, it can work, I'm just not 100% sure how much the install changed because of the flares.